How To Fix Pxe E61 Media Test Failure Check Cable

When you encounter the error message \"PXE-E61: Media Test Failure, Check Cable,\" it means your computer is trying to boot from a network device instead of the hard disk drive. This error message is quite common when your computer cannot find an operating system to boot from. This error is usually caused by a problem with your computer's hard drive or its cable connection.

Here are some steps you can take to fix this error message:

1. Check the cables: Make sure that your computer's hard drive and its cables are securely connected. Sometimes, a loose connection can cause this error message. If you see any loose cables, reconnect them and see if that fixes the issue.

2. Disable PXE boot: Go into the BIOS settings of your computer and disable the PXE boot option. This will prevent your computer from attempting to boot from the network.

3. Change the boot order: Make sure that your hard drive is set as the first boot device in your computer's BIOS settings. This will ensure that your computer boots from the hard drive first, and avoids any network boot issues.

4. Perform a hard drive diagnostic: Your computer's hard drive could be failing, causing this error message. Run a hard drive diagnostic tool to check if there are any errors on the hard drive. You can use tools like Western Digital's Data Lifeguard Diagnostics or Seagate's SeaTools.

5. Replace the hard drive cable: If none of the above steps work, the problem could be with the hard drive cable itself. Replace the cable with a new one and see if that fixes the issue.

In conclusion, the error message \"PXE-E61: Media Test Failure, Check Cable\" can be caused by multiple factors. By following the steps mentioned above, you can diagnose and fix the issue with your computer, and prevent further errors from occurring.

If you want to know more about industrial network cabinet,china fiber optic splice closure,china fiber optic distribution box,please consult the fiber optic splice closure factory