Leo Network
You are here:

How To Keystone Jack

Views: 144 Author: Site Editor Publish Time: Origin: Site

Keystone jacks are essential components in creating a structured cabling system. They allow for the termination of cables, which then can be connected to patch panels or other networking devices. In this article, we will discuss the steps involved in installing and terminating a keystone jack.

Step 1: Gather the Necessary Tools and Materials

Before beginning the installation process, you will need to gather a few tools and materials, including the keystone jack, a compatible faceplate, a punchdown tool, a wire stripper, and a cable tester.

Step 2: Strip the Cable

Strip the outer jacket of the cable to expose the eight wires inside. Use the wire stripper to strip off about an inch of insulation from the end of each of the eight wires. Ensure that the wires are evenly stripped so that you can fit them into the keystone jack.

Step 3: Arrange the Wires

Arrange the wires in the order specified by the T568B wiring standard. The order of the colors should be, from left to right, white/orange, orange, white/green, blue, white/blue, green, white/brown, and brown.

Step 4: Insert the Wires into the Keystone Jack

Insert each of the wires into their respective color-coded slots on the keystone jack. Ensure that the wires are fully inserted and seated in the slots. You may need to use a small amount of force to achieve this.

Step 5: Terminate the Wires

Use a punchdown tool to terminate the wires into the keystone jack. Place the tool over each wire and apply pressure to push it down into the slot. Repeat this process for all eight wires, ensuring that the keystone jack is firmly secured to the cable.

Step 6: Test Your Connection

Use a cable tester to verify that your connections are working correctly. These testers will help confirm that your wiring is correct and that there are no connectivity issues.

Step 7: Install the Keystone Jack into a Faceplate

Insert the keystone jack into a compatible faceplate and secure it in place with screws. You can now connect your cable to a patch panel or other networking device.

In conclusion, installing a keystone jack can seem intimidating, but it is an important step in creating an efficient structured cabling system. By following the steps outlined in this article, you can successfully terminate your cables and ensure that your connections are working correctly.

If you want to know more about industrial network cabinet,china fiber optic splice closure,china fiber optic distribution box,please consult the fiber optic splice closure factory


Contact Us


By continuing to use the site you agree to our privacy policy Terms and Conditions.

I agree