How To Punch Down Cat6 Keystone Jack

As the world continues to become more digitized, you can't help but notice the increased use of network cabling in homes and offices. It is now essential to wire our homes and offices with fast, reliable Ethernet connections to get access to the internet, connect to servers and access files. To achieve this, one needs the right tools and knowledge, especially when it comes to installing and terminating cat6 cables. In this article, we'll guide you on how to punch down a cat6 keystone jack.

Step 1: Prepare the necessary tools

Before starting, you need to have all the necessary tools at hand, including a punchdown tool, a wire stripper, a cat6 keystone jack, and a cable tester.

Step 2: Strip the cable

Using a wire stripper, strip off 1-2 inches of the outer jacket from the cat6 cable. Inspect the cable to ensure there are no wire breaks or kinks. Next, untwist and separate the wires by color. Ensure you maintain the correct color-coding scheme as follows:

- Orange

- White and Orange

- Green

- White and Green

- Blue

- White and Blue

- Brown

- White and Brown

Step 3: Thread the wires through the keystone jack

Insert the wires into the keystone jack in the correct order following the color-coding scheme above. Ensure you slide the wires through the jack's end until they come out of the top of the keystone jack.

Step 4: Press the wires down with the punchdown tool

Take the punchdown tool and gently press the wires into the slots in the keystone jack. Ensure you make firm contact with the jack, then give each wire a gentle tug to confirm it is correctly seated in the jack. Repeat this procedure for all eight wires.

Step 5: Trim the wires

Using the wire stripper, carefully trim the excess wire on the keystone jack. Ensure you hold the tool horizontal and cut straight down to avoid nicking the wire strands.

Step 6: Install the keystone jack into the wall plate

Push the keystone jack into the corresponding opening in the wall plate until it snaps fully in place. Ensure the wires are not kinked, pinched, or compromised in any way.

Step 7: Test the connection

Finally, use the cable tester to confirm that you've correctly punched down and installed the keystone jack. If the cable has an issue, you can troubleshoot and identify the problem before connecting to the network.

Conclusion

Punching down a cat6 keystone jack is easy and straightforward, but it requires proper understanding and attention to detail. Following the above steps will come a long way in ensuring you have a properly installed cat6 cable connection that can carry high-speed data traffic reliably. Besides, investing in good quality cables, keystone jacks, and tools can make the whole process easier and less frustrating.

If you want to know more about industrial network cabinet,china fiber optic splice closure,china fiber optic distribution box,please consult the fiber optic splice closure factory