How To Use Keystone Jack

A keystone jack is a type of connector that is commonly used in telecommunications and networking. It is designed to fit into a keystone wall plate, which allows for easy and flexible installation. In this article, we will discuss how to use a keystone jack to create a patch cable for your networking needs.

Step 1: Gather the necessary equipment

Before you start, you will need to gather the following equipment:

- Keystone jack (RJ45 or RJ11, depending on your needs)

- UTP cable (make sure it is the correct gauge for your keystone jack)

- Wire stripper

- Crimping tool

- Scissors

- Needle nose pliers (optional, but helpful)

Step 2: Strip the cable

Using a wire stripper, strip about an inch of the outer sheath from the UTP cable. Be careful not to damage the wires inside.

Step 3: Separate the wires

Once you have stripped the cable, you will need to separate the individual wires. Use a pair of scissors or your fingers to carefully untwist the wires.

Step 4: Arrange the wires

Arrange the wires according to the color code specified by your keystone jack. The most common color code is T568B. This is the order in which you should arrange the wires:

- Orange/white

- Orange

- Green/white

- Blue

- Blue/white

- Green

- Brown/white

- Brown

Step 5: Insert the wires

Insert the wires into the appropriate slots on the keystone jack. Make sure that each wire is fully inserted and that the copper core is visible through the transparent housing.

Step 6: Trim the excess wires

Using a pair of scissors or needle nose pliers, trim the excess wires so that they are flush with the surface of the keystone jack.

Step 7: Secure the keystone jack

Press the keystone jack into the keystone wall plate until it clicks into place. This will secure the jack and prevent it from coming loose.

Step 8: Test the connection

After you have installed the keystone jack, use a cable tester to test the connection. Make sure that each wire is connected properly and that there are no connectivity issues.

By following these steps, you can easily use a keystone jack to create a patch cable for your networking needs. With its versatility and ease of use, a keystone jack is a great tool for both professional and DIY networking projects.

If you want to know more about industrial network cabinet,china fiber optic splice closure,china fiber optic distribution box,please consult the fiber optic splice closure factory